|
Advantages vs. banded wood skids
-
Casing Spacers will save you time and labor - quickly installed by a single worker and easily field adjustable.
-
Casing Spacers' performance and reliability are far superior. Casing spacers provide electrical insulation, will not rot or settle, support carrier pipe weight uniformly, protect against long term corrosion, require no casing filler and slide into place easily.
Carbon Steel and Stainless Steel Casing Spacers
-
Heavy duty two-piece #304 Stainless Steel or Carbon Steel Casing Spacers with durable glass filled polymer runners.
-
Available in 8 inch and 12 inch widths. (8" width through 24" pipe recommended).
-
Fast and easy installation on concrete, PVC, ductile iron, polyethylene and steel cased crossing applications.
-
Casing spacers are line with ribbed EPDM to prevent electrical contact between the carrier pipe and the spacer.
-
Carbon Steel Casing Spacers are fabricated from pickled & oiled steel and then coated with a fusion bonded copolymer based thermoplastic for superior abrasion resistance and corrosion protection.
-
Casing Spacers for bell & spigot joints or large diameter applications are designed and fabricated to insure and extra margin of support.
-
CCI Pipeline Systems has the experience to design and manufacture virtually any configuration of casing spacer, including multi-carrier cluster within a single casing.
Polyethylene Casing Spacer
 |
- Injection molded from high density polyethylene.
- Provide and economical alternative to metallic casing spacers.
- Excellent dielectric strength and low moisture absorption provide minimal electric current lose with no impairment of cathodic protection.
- High impact resistance and excellent frictional characteristics make polyethylene spacers a pipeline industry standard on mechanical joints, restrained joints, push-on joints and welding pipe joints
|
Ordering Information
To place and order, please have the following information available:
-
Casing Spacer Material: Carbon Steel, Stainless Steel, or Polyethylene
-
Configuration: Standard (Clear Bell Only), Centered, Centered Restrained, Clustered
-
Type of Carrier Pipe
-
Diameter of Carrier Pipe
-
Inside Diameter of Casing Pipe (or Casing wall thickness)
-
Outside Diameter OD of Bell (if applicable)
-
Width of Spacer, Model Number etc..
-
Additional information (for multi-pipe, cluster design)
-
Model & Quantity of End Seals
-
Quantity of Spacer*
* Recommended spacing for steel carrier pipe is 6 ft. to 8 ft.
(Typically, length of casing, divide by 6 +2 = # of spacers).
Recommended spacing for PVC type pipe (Bell & Spigot)
is 2 casing spacers per joint.
CCI reserves the right to recommend spacing according to application.
|
|
