Shrink sleeve for girth-weld protection of high operating temperature 3LPE coated pipelines

The GTS-80 system provides superior corrosion protection and excellent bonding on 3LPE coated pipelines operating
at temperatures up to 80°C (176°F) (actual rating may vary depending on local requirements.

• Unique adhesive technology allows for lower installation temp pre-heats with/out epoxy
• Products are available in various configurations to meet project installation requirements
• Superior corrosion protection when epoxy primer (E Primer) is "force-cured" and pre-inspected on steel only
• High stress strength adhesives pass Aleyska Shear Test at maximum operating temperature
• The same pre-heat temperature with or without epoxy minimizes installation procedure issues
• Epoxy is applied to steel only, which results in lower material and labour costs
• “Force-cured” epoxies enable the joints to be pre-inspected prior to sleeve application and will not be displaced during sleeve alignment and recovery

 Features & Benefits